All Electric Hoist and Crane Inquiries
-
lvzhongguang at 2026-08-12 19:00:59 wrote:
- 悬臂吊臂展2.5米，0.5T起重
- 出口波兰，能做整机CE认证出口吗？
-
lea mae simbajon at 2026-08-12 14:36:26 wrote:
- Overhead monorail crane
- Please see below the specifications for the overhead monorail system required for our project. Kindly provide your quotation and recommended configuration. SCOPE • Two (2) units – 2,000 lb capacity overhead monorail • Two (2) units – 6,000 lb capacity overhead monorail • Inclusive of power, controls, testing, and commissioning Note: Structural supports are already included in the warehouse design and are not part of the scope. Kindly provide the hoist and rail loads, reactions, and support point requirements so these can be coordinated with the building structure. SYSTEM PARAMETERS Rail length: 63 m Hook lifting height: approx. 3 m (near floor) up to a workable range of 15–16 m Application: standard warehouse use – lifting, positioning, and moving of goods within the warehouse SITE CONDITIONS • Coastal/marine location – must withstand salt exposure and corrosion • Tropical climate – high heat, high humidity, monsoon rain • Warehouse is not climate controlled (no HVAC)
-
Joe at 2026-08-06 15:22:42 wrote:
- Looking for an overhead 5t crane 12m span and 12m run
-
ABEL VILLAMIL at 2026-07-22 07:53:04 wrote:
- puente de grua
- Deseo cotizacion de un puente de grua de 5 TN, monorriel luz de vigas carrileras 14 mtros. altura de elevacion 4,5 metros
-
Tom at 2026-07-08 23:10:32 wrote:
- 4 Post Overhead Crane
- 3 Ton, Max Ht. of 15\' 10\", 75\" wide, 18\' long. We have 16\' ceiling and need as much under crane as possible.
-
William Redda at 2026-07-08 18:43:08 wrote:
- crane
- 2 Ton Overhead Crane S.N. Requirement Required Specification Compliance (Yes/No) Supplier Remarks / Deviation 1 Crane Type Single-girder overhead travelling crane 2 Capacity Safe Working Load (SWL): 2 Tons 3 Hoisting Movement Fully motorized/electrical vertical movement (hoisting/lowering). 4 Trolley Movement Fully motorized/electrical cross-travel movement. 5 Control System Operated via a remote control. 6 Safety & Travel Limits Operational limit switches for both vertical and cross-travel. 7 Span 17,300 mm 8 Overall Dimensions 17,540 mm × 11,990 mm 9 Beam Height Above Floor 2,540 mm 10 Minimum Hook Approach / Headroom 810 mm 11 Crane Weight 350 kg (self-weight excluding lifted load). 12 Hoisting Speed 4 m/min 13 Trolley Travel Speed 20 m/min 14 Bridge Travel Speed 20 m/min 15 Variable Frequency Drive (VFD): Preferred for smooth starting, stopping, and speed control.
-
Edgar Echeverría at 2026-07-04 01:48:44 wrote:
- Grúa pluma de pared de 500 kg.
- Hola que tal, me presento soy Edgar Echeverria de la empresa PIENSA, Productos Eléctricos y Neumáticos. Estamos buscando una grúa para nuestro taller. Necesitamos datos tecnicos y precios
-
Edgar Echeverría at 2026-07-04 01:48:43 wrote:
- Grúa pluma de pared de 500 kg.
- Hola que tal, me presento soy Edgar Echeverria de la empresa PIENSA, Productos Eléctricos y Neumáticos. Estamos buscando una grúa para nuestro taller. Necesitamos datos tecnicos y precios
-
Mohammed at 2026-07-01 17:55:12 wrote:
- Gantry Crane
- Greetings, Can you please advise if you can provide a gantry crane with the below specs (similar to the picture attached). 1) Technical Specification (Mobile Gantry Crane – Workshop Use) A. General Description • Equipment: Mobile Portable Gantry Crane (A-frame type, wheel-mounted) • Application: Oilfield equipment maintenance (pump parts, skid components, fluid ends, engines) • Installation: Indoor workshop (concrete floor) B. Design Parameters Item Requirement Rated Capacity 5 Ton (minimum) (recommend 7.5–10T option pricing) Span (clear width) 5 – 7 meters adjustable Lifting Height 4 – 5 meters under hook Crane Type Adjustable height portable gantry (bolt-type or telescopic legs) Mobility 4 heavy-duty swivel wheels with locking brakes Travel Mode Manual push (motorized travel as an option) C. Hoisting System Item Requirement Hoist Type Electric wire rope hoist (preferred) OR heavy-duty chain hoist Capacity Match crane capacity Lifting Speed Dual speed (slow + fast) Control Pendant control Power Supply 380–415V / 3Ph / 50Hz Limit Switches Upper & lower limit switches mandatory D. Structure & Mechanical • Main beam: Structural steel I-beam/ box beam • End frames: A-frame (reinforced welded structure) • Surface protection: Shot blasted + epoxy paint (industrial workshop grade) • Wheels: Polyurethane or forged steel (suitable for smooth concrete floor) • Beam deflection: As per ISO standards E. Safety Requirements • Emergency stop on pendant • Overload protection • Mechanical end stops • Lockable wheels (parking brakes) • Anti-derailment protection • Warning labels and SWL markings F. Compliance & Documentation • Design standard: ISO / FEM / CMAA equivalent • Certification required: o Load test certificate (125%) o Third-party inspection (TÜV / BV / SGS preferred) • Documentation: o GA drawing o Electrical schematic o O&M manual Summary of specs: • Capacity: 5 Ton (with option up to 10 Ton) • Span: approx. 5–7 meters • Height: 4–5 meters under hook • Power: 380–415V, 3Ph, 50Hz • Indoor workshop usage • Strongly consider: o Adjustable height gantry o Wire rope hoist
-
Mabel Caiñas at 2026-06-25 02:16:06 wrote:
- Gatos electricos y gruas viajeras
- Gatos elect. 75 ton. c/mando eléctrico p/funcionamiento de 4 gatos a la vez Grua viajera de 10 ton Claro: 17.36 metros. Izaje efectivo: 10.5 metros. Recorrido; 64 metros. Grua viajera de 50 ton Claro: 17.35 metros. Izaje efectivo:10.5 metros. Recorrido; 120 metros. Grua viajera de 10 ton Claro: 9.36 metros. Izaje efectivo: 10.5 metros. Recorrido; 32 metros.
Get free quotation